Last Modified: 11-29-2007 1.6 J
Service Category: Audio/Visual/Telematics Section: Audio/Video
Model Year: 2008 Model: Sequoia Doc ID: RM000000POK02DX
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: INSPECTION PROCEDURE (2008 Sequoia)

Cellular Phone cannot Send/Receive

INSPECTION PROCEDURE

PROCEDURE

1.

CHECK "BLUETOOTH" SETTINGS

(a) Check if the "Bluetooth" settings are correct.

OK:

"Bluetooth" settings are correct.

OK

2.

CHECK CELLULAR PHONE

(a) Check if the cellular phone is "Bluetooth" compatible.

HINT:

Some versions of "Bluetooth" compatible cellular phones may not function.

OK:

Phone is "Bluetooth" compatible.

OK

3.

CHECK SETTINGS

(a) Check if the cellular phone functions.

HINT:

The cellular phone is unable to call under any of the following conditions.

  • The cellular phone is locked.
  • The directory is being transferred.
  • The line is crossed.
  • Transmission is regulated.
  • The power is off.
  • The cellular phone is not connected to "Bluetooth" ("BT" is displayed while connected).

    OK:

    None of the above conditions exist.

OK

4.

CHECK CELLULAR PHONE

(a) Check if the cellular phone can make a call.

HINT:

When the battery is low, calls cannot be made or received.

OK:

Cellular phone can make a call.

OK

5.

CHECK RECEPTION

(a) Set the cellular phone so that it can receive calls.

(b) Place the cellular phone close to the radio receiver assembly.

(c) Check if the cellular phone has reception according to the radio receiver assembly.

OK:

Cellular phone has reception.

OK